 |
| |
| The
piccolo processor
operates according a patented principle
and is specially outlined for the
application of 16 mm microfilms.
Each user will be thrilled by the
simple handling of this unit.
|
|
|
|
|
|
| |
After inserting the exposed 16 mm film into
the film-cassette, the end of the film is
tracked directly into the rack (without leader).
Afterwards the film horizontally passes through
the developing process in the following order
of succession: developer, fixer, 1st rinse,
2nd rinse, drying.
After 30 sec. the film can be threaded into
the take up-spool. The special Piccolo
chemical set (4 bottles of 1 l each:
developer, fixer, 1st rinse, 2nd rinse) is
directly connected to the unit.
The chemicals are taken out of the bottles
and transported to the film by pumps, through
an electronically controlled heat exchanger.
From here the chemicals are running back into
the bottles. After about 8 films of 16 mm/
30m, or a life time of one week the chemical
set is used up. |
|
|
| |
| The
unique features of the piccolo are: |
 |
simple
inserting of the film into the rack
(without leader) |
|
simple
handling of the chemicals |
|
no water
supply and water discharge hose necessary |
|
extremely
low power consumption: heating-up phase
800 W / stand by 200 W
Accessory: Adapter for 3M cassettes |
|
|
|
| |
| Technical
Data : |
|
Film: |
16mm microfilms |
|
Time of
passage: |
1 m/min. |
|
Chemical
temperature: |
regulated,
adjustable 28- 38°C |
|
Chemicals: |
4 bottles
of 1 l each: developer, fixer, 1st rinse,
2nd rinse.With regard to the archival
capability (residual thiosulfate) it
is necessary to use the Staude chemical
set, which is specially produced for
this processor. |
|
Power supply: |
230 V /
50 Hz / 800 W 110 V |
|
transformer
available
Dimensions: |
H/W/D:
42 x 67 x 28 cm |
|
Weight: |
22 kg |
|
|
|
|
|
|
