 |
| |
| The
unomat is a fully
automatic and user friendly negative
microfilm processor which handles
1 x 16 mm or 1 x 35 mm films (on polyester
or tri-acetate base).
The sequence of the baths is as follows:
developer, intermediate rinse, fixer,
final
rinse.
Machine operation and film insertion
are done in daylight - no need for
darkroom operation.
|
|
|
|
|
|
| |
A film inspection station
is possible just ahead of the take-up device.
The chemistry temperature and the processor
speed are adjustable. The unomat requires
a three-phase current, 400 V 16 A, as well
as a cold water connection and drain. The
water is tempered in the processor.
The automatically replenishment system, which
is adjustable, ensures consistency of the
individual baths. The level of the replenishment
supply containers is monitored and displayed.
The unomat is a very user
friendly, convenient automatic processor,
which is environment friendly through efficient
energy usage, coupled with the lowest water
consumption possible, whilst still achieving
processing to archival standards. |
|
|
| |
| technichal
data unomat: |
 |
Film
sizes: |
1 x 16,
or 1 x 35 mm roll film of 30.5 m - 66
m lengths (100-200 ft),
on polyester or tri-acetate base |
|
Film transport
speed: |
1-3 m/min.
(3-9 ft/min.) |
|
Processing
method: |
Conventional
(negative) |
| |
Sequence
of baths: |
Developer,
intermediate rinse, fixer, final rinse |
|
Replenishment: |
Developer
and fixer |
|
Chemistry
temperature: |
adjustable:
32-42°C, auto control |
|
Rinse: |
warm water
rinse 32-42°C, auto control; flow
rate 0,5-1 litres/min.
(1 US quart/ min.) |
|
Tank capacity: |
3,5 litres
each (3,5 US quarts)
|
| |
Cold water
connection: |
inflow
½”; discharge ¾
“ |
|
Electrical
requirement: |
400 V /
16A / 3,8 kW (three phase current) |
|
Dimensions(complete): |
970 x 400
x 1040 mm (l x d x h) |
|
Weight: |
(without
liquids) 82 kg |
|
|
|
|
|
|
